User`s manual

III
Installing the USB Driver (Plug and Play)……………………. 39
Setting Parameters…………………………………………….. 44
Parameters for Win 98……………………………………… 45
Parameters for Win 2000…………………………………… 48
For NT 4.0…………………………………………………...52
For Win XP…………………………………………………. 54
Troubleshooting………………………………………………… 58
LED and LCD Diagnosis……………………………………… 58
Media Problems……………………………………………….. 58
Ribbon Problems……………………………………………….59
Other Problems………………………………………………... 59
Miscellaneous…………………………………………………. 60
Recovery………………………………………………………. 62
Caring for Your Printer…………………………………………63
Cleaning the Print Head……………………………………….. 63
Cleaning the Roller……………………………………………. 64
Cleaning the Media Compartment…………………………….. 64
Technical Reference…………………………………………….. 65
General Specifications………………………………………… 65
Fonts, Bar Codes and Graphics Specification………………… 67
Printer Programming Language A, PPLA………………….. 67
Printer Programming Language B, PPLB………………….. 68
Printer Programming Language Z, PPLZ…………………... 69
Interface Specifications……………………………………….. 70
USB………………………………………………………… 70
Serial Interface……………………………………………… 71
Connection with Host:……………………………………… 72
Parallel (Centronics)………………………………………... 74
Auto Polling………………………………………………… 74
ASCII TABLE………………………………………………… 75
Appendix A: Printer Status……………………………………. 76
Appendix B: Stand-alone Keyboard and Barcode Reader…... 77
IV
Keyboard………………………………………………………. 77
Form Control Functions……………………………………….. 77
Example: Making a Keyboard Form………………………...78
Output………………………………………………………. 80
Barcode Reader………………………………………………... 81
Example: Making a Barcode Reader Form………………….82
Output………………………………………………………. 84
Appendix C: Cutter Installation………………………………. 85
Appendix D: Dispenser Installation…………………………… 88
Calibrating the Dispenser Sensor……………………………… 90
Calibration Steps……………………………………………. 90
Modification for the outside and inside coating of ribbon……..91