User`s manual

Notes:

1. Since the fontboard and flash modules use the same

connector, they cannot function at the same time.

2. All three models connect to the ArgoKee through the

RS-232 serial port.

3. Only the X-2000v and X-3000v connect to a PC keyboard

through a PS/2 port.

Printer Programming Language Z, PPLZ

Specification X-2000v

General fonts 10 resident fonts (9 bitmapped fonts and 1

scalable fonts)

International

character sets

14 international character sets: USA, USA2,

UK, Holland, Den / Nor, Swe / Fin, German,

France1, France2, Italy, Spain, Misc., Japan,

page 850.

Soft fonts Downloadable soft fonts

Bitmapped Font

expandability

1x1 to 24x24

Bar code types

One-Dimension barcode:

Code 11, Interleaved 2 or 5 (standard,

industrial) , Code 39, Code 128 (A, B&C),

Codabar, Logmars, MSI, UPC/EAN extension

EAN-8, EAN-13, UPC-A, UPC-E and PostNet

Two-Dimension barcode:

PDF-417, MaxiCode, Data Matrix (ECC200

only), QR Code

Graphics HEX and binary graphics with normal as well as

compressed image

Interface Specifications

This section presents the interface specifications of IO ports for the

printer. These include pin assignments, protocols and detailed

information about how to properly interface your printer with your

host or terminal.

USB

Pin Signal Name

1 VBUS

2 D -

3 D+

4 GND

3 4

USB series “B” Receptacle Interface

Connector Terminal Pin Assignment