User`s manual

PA1

Single copy

End of form

Disable store to flash

2. Send the file READER.FRM to printer under MS-DOS

>COPY/B READER.FRM LPT1:

3. Turn off the printer, connect the barcode reader, set on the

LCD to ON position and turn on the printer.

4. The form READER is automatically executed. Scan product

name and number from printed bar codes using the barcode

reader.

5. A label is printed. The copy count depends on the PA

command for the READER form. Step 4 is automatically

repeated.

Product No.?

11223344↵

Product Name?

APPLE↵

Output

Notes:

1. To return to normal operation, press and hold the CANCEL

button and turn on the printer again.

2. When using a keyboard or barcode reader communicating

with a host through the Centronics or serial port is

prohibited.

3. For the keyboard form the P command is not allowed, while

for the barcode reader/scanner form a PA command must

be included.