User's Manual

Wireless 802.11a CPE
User Manual
Page 13 of 36
2.2.5. Advance
The Station Advanced Configuration page shows the settings and current operation status of the station.
Wireless Mode: Select wireless mode. 802.11A Only, 802.11 AN mix mode are supported.
Country Region Code: This field displays the region of operation for which the wireless
interface is intended.
B/G Protection: User can choose from Auto, On, and Off
 Auto: STA will dynamically change as AP announcement
 ON: Always send frame with protection.
 Off: Always send frame without protection.
TX Rate: Manually force the Transmit using selected rate. Default is auto.
TX Burst: Frame burst mode.
HT Physical Mode: Configure HT Status in use, containing HT(MM or GF), BW(20 or Auto),
GI(Long or Auto), and MCS(0~15, 32, or Auto) settings.