User's Manual

[鍵入文字]
ARGtek Communication Inc. www.argtek.com
E-Mail: [e-mail] Tel:+ 886-2-2999-6958 Fax :+ 886-2-2999-7742
AP Router
1
DC 12V Power Adapter
1
Antenna
2
Manual/QIG CD
1
Before installing the router, connect your PC to the internet through your broadband service. (If there
is any problem, contact your ISP.)Then proceed through the following steps.
1. Turn off your PC(s), cable/ ADSL modem and the router.
2. Adjust the antenna if needed. Normally, straight up on router is good.
3. Connect the PC(s) and each switch/hub on your local area network to the LAN ports on the
router.
4. Connect the ADSL/DSL/cable modem to the router WAN port.
5. Connect the power adapter between the DC-Jack on the router and an electrical outlet. The
router will start to work automatically.
6. Turn on your PC(s) and the cable/ADSL modem.