DV5470 User Manual Package Contents: Manual Camera Pouch Installation CD Earbuds AV Cable
CONTENTS 1. NOTICE....................................................................2 2. SETUP .....................................................................3 2.1 BATTERY INSTALLATION ...........................................3 2.2 MEMORY CARD .......................................................4 2.3 CONFIGURATION & INSTALLATION .............................4 3. MENU SETUP..........................................................5 4. BASIC FUNCTIONS..............................................
Thank you for purchasing the Argus DV5470 Digital Video Camera 1. Notice Carefully rotate the LCD, Damage will be caused by over rotating. a. Open LCD and push it to 90 0 against the body b. Start to capture or play with LCD at the appropriate angle. LCD and lens maintenance: a. Direct sunlight may cause the damage of the LCD. b. Only clean the lens and LCD screen with a soft cloth. Caution: a. Do not store the camera in temperatures above 100 . b. Keep the DV Camera away from moisture.
c. d. void your warrany. Please consult with a qualified technician for maintenance. Any use of the unrecognized components may cause fire, electrical shock or other dangers. 2. Installation 2.1 installation of the battery 1). Push the battery door at the bottom of the DV. 2). Open the battery door. 3). Inset the battery according to the positive pole. Notice to the battery security 1). The lithium battery keeps the clock running and internal flash memory when the AC adapter is unconnected. 2).
2.2 Memory card 1)Open the battery cover of the DV. 2)Insert the card with the reverse side against the positive side of DV. 3)Close the battery cover. Attention: keep the card in “unlock” status. All data will be deleted if you format the memory card, please backup the file before format. The memory cards available to the product: 1)Standard SD card(8MB—1G) 2)Memory sticks with 3V or 3.3v(8M—1G) 3)SD card with 5v is not available.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Left up right down OK button Zoom out Menu button Shutter button zoom in REC/PLAY speaker 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 3.
How to enter menu setup 1). POWER on; 2). Press “REC/PLAY” button,Push the 5way button left/right to select “setup” icon. 3). Press the “OK” button to enter “setup” menu. 3.1 Flicker frequency Set the light frequency according to different countries: 1). Power on and press “REC/PLAY” button to enter “Setup” menu; 2). Press the 5way button to select “flicker frequency” icon, then press the “OK” button to enter; 3). Press the 5way button up/down to select “60HZ” or “50HZ”; 4).
3.3 Beep 1)Power on and press “REC/PLAY” button to enter “Setup” menu; 2)Push the 5way button left/right to select “Beep”; 3)Press the “OK” button to enter the beep setup, select “on” or “off”; 4)Press “REC/PLAY” or “MENU” button to return to the main menu. 3.4 Memory card format 1. Set the memory card in “UNLOCK” status; 2. Insert the memory card into the card slot and power on; 3. Press “REC/PLAY” button to enter “SETUP” menu; 3. push the 5way button left/right to select “format”; 4.
3)Press the “OK” button to enter media selecting setup, both internal flash and external card can be selected; 4)Push the 5way button up/down to select “internal flash” or “external card”, press the “OK” button to confirm and return to the submenu, 5)Press “REC/PLAY” or “MENU” button to return to the main menu. Note: the default setting is “External card” when the memory card is inserted; otherwise, the default setting is “internal flash”. 3.6 Default setting 1).
4)Push the 5way button up/down to select the language you prefer, then press the “OK” button to confirm and return to the submenu 5)Press “REC/PLAY” or “MENU” button to return to the main menu. 3.8 Power save (Auto power off) You can set the auto power off time to save the battery; 1). Power on and press “REC/PLAY” button to enter “Setup” menu; 2). Push the 5way button left/right to select “power save” ; 3). Press the “OK” button to confirm and enter “power save” setting; 4).
3). Press the “OK” button to confirm and enter the logo display setting, select “open” or “close”; 4). Push the 5orientation key upwards or downwards to select “on” or “off”, press the “OK” button to confirm and return to the submenu, 5). Press “REC/PLAY” or “MENU” button to return to the main menu. 3.11 Brightness 1). Power on and press “REC/PLAY” button to enter “Setup” menu; 2). Push the 5way button left/right to select “brightness”; 3). Press the “OK” button to enter the brightness setting; 4).
a. Resolution 1. In the video mode, press the “MENU” button to enter the submenu: 2. Push the 5way button to left/right to select “resolution”: 3. Press the “OK” button to confirm and select the resolution: “640*480” or “320*240”; 4. Push the 5way button up/down to select the resolution you prefer 5. Press the “OK” button to confirm and return to the submenu of video mode; 6. Press the “MENU” button to return to the video mode; b. Frame rate 1.
1. In the video mode, press the “MENU” button to enter submenu; 2. Push the 5way button left/right to select “Audio”; 3. Press the “OK” button to confirm and enter audio setting “on” or “off”; 4. Push the 5way button up/down to select “on”; 5. Press the “OK” button to confirm and return to the submenu of video mode; 6. Press the “MENU” button to return to the video mode; d. White balance Proper white balance can help to obtain the optimized the video clip. 1.
1. Press the “shutter” button slightly to start capture; 2. Do not open the battery door to take out the battery or SD card during the image saving status. Otherwise, it may cause the image lost or damaged. 4.2.1 Digital zoom How to use digital zoom? 1. Press “T” or “W” button to adjust the digital zoom in “camera” mode; 2. Press the “Shutter” button to start capturing. Notice: To zoom in more, the lower quality of the image.
timer”, “20s timer”; 4. Push the 5way button up/down to select; 5. Press the “OK” button to confirm and return to the submenu of Camera mode. Notice: the maximum shooting is 3 images when in “sequence” mode. b. 1. 2. 3. 4. 5. 6. c.
Force on: Force on the flash Force off: Force off the flash Flash setting: 1. In Camera mode, press the “MENU” button to enter the submenu; 2. Push the 5way button left/right, select “flash mode”; 3. Press the “OK” button to confirm, set flash by “force on”, “auto”, “force off” ; 4. Push the 5way button up/down to select the flash mode; 5. Press the “OK” button to confirm and return to the submenu of Camera, Notice: The flash distance is approximately 1.8 – 2.5 M. d.
EV can be set to 2.0 when the light is insufficient. 1. In Camera mode, press the “MENU” button to enter the submenu; 2. Push the 5way button left/right to select “EV”; 3. Press the “OK” button to confirm; 4. Push the 5way button up/down to adjust exposure compensation from 0 – 2.0; 5. Press “REC/PLAY” button to return to the main menu; 6. Push the 5way button left/right to select camera mode, press the “OK” button to confirm and start capturing according to the new EV. f. Image quality 1.
6. Camera; Press the “MENU” button to return to the camera mode. h. White balance Proper white balance can help to obtain the optimized image effect. 1. In the camera mode, press the “MENU” button to enter the submenu; 2. Push the 5way button left/right to select “white balance”; 3. Press the “OK” button to confirm, white balance option: “auto”, “daylight”, “Tungsten”, “fluoresce” and “cloudy”; 4. Push the 5way button up/down to select the white balance you prefer; 5.
2. 3. 4. 5. Push the 5way button to select “quick preview”; Press the “OK” button to confirm and select “on” or “off”; Push the 5way button upwards to select “on”; Press the “OK” button to confirm and return to the submenu of Camera; 6. Press the “MENU” button to return to the Camera mode; 7. Press the “OK” button to confirm and quick preview the previous image. . 4.3. Playback You can playback the video clip in the “Playback” mode. 1. Power on and enter video mode automatically; 2.
(2) Copy the file into the DCIM file folder of this product; (3) Disconnect the USB cable; the movie can be played in “playback” mode. In “playback” mode, press the “menu” button to enter the submenu of delete, thumbnail, set logo, rotate, print, lock, crop and slide show. Remarks: Rotate, print, crop and slide show function is not available in video playback mode. a. Delete clip You can enter the submenu of playback mode to delete the video clip. 1.
C. set logo: Same operation as the “logo display” (see page 11). d. Lock: The lock function can ensure you to protect the video clips or images; 1. Under “playback” mode, press the “menu” button to enter the submenu; 2. Select “lock” by push the 5way button left/right to select “lock”; 3. Press the “OK” button to confirm, you can select “lock current”, “lock all”, “unlock current” and “unlock all”; 4. Push the 5way button up/down to select “lock current” or “lock all”; 5.
4.5.Photo preview You can preview the photo in “Photo” mode. 1. Power on and press the “REC/PLAY” button to enter the main menu; 2. Push the 5way button left/right to select “photo” mode; 3. Press the “OK” button to confirm and enter “photo” mode; 4. Push the 5way button up/down to preview the images. In the “photo” mode, press the “menu” button to enter the submenu to select “delete”, “thumbnail”, “set logo”, “rotate”, “print”, “lock”, “crop” and “slide show”. a. Delete image 1.
10. When you select one image, press the “OK” button to preview full screen image. c. Play logo Same operation as the “logo display” (see page 11). d. Rotate 1. In “Photo” mode, press the “MENU” button to enter the submenu; 2. Push the 5way button left/right to select “rotate”; 3. Press the “OK” button to confirm and select the “photo” mode; 4. Push the 5way button up/down to rotate the photo; 5. Press the “OK” button to save the image after rotating, the setting is completed. e. Lock 1.
2. 3. 4. 5. Push the 5way button left/right to select “crop”; Press the “OK” button to confirm Push the 5way button up/down/left/right to move the frame in the image to be cropped properly; Press the “OK” button to crop and save. g. Slide show 1. In “Photo” mode, press the “MENU” button to enter the submenu; 2. Push the 5way button left/right to select “slide show”; 3. Press the “OK” button to confirm and select the image 4.
3. DV mode: you can charge the lithium battery in this mode. 5.1 PC camera Driver installation: 1.
25
26
Connect the camera with PC by USB cable, Power on the DV, then push 5way button to select “PC CAMERA”; 27
An interface “Found new hardware Wizard” appears, select “Yes, this time only”, then click “next”; Select “install the software automatically (Recommended)”, click “next”; 28
If “hardware installation” interface appears, click “Continue Anyway” ; 29
30
If the following interface appears, click “cancel”; 31
An interface “Found new hardware Wizard” appears, select “Yes, this time only”, then click “next”; Select “install the software automatically (Recommended)”, click “next”; 32
If “hardware installation” interface appears, click “Continue Anyway”; 33
The installation is finished and now you can use the pc camera function; 34
2. How to use PCCAM function 1. Connect this product to PC by USB cable; 2. Power on and select “PC Camera” mode; 3. Press the “OK” button to confirm; 1. Double click the icon “my computer” on the desktop of PC 2. Double click the icon “ ” Then you can start to use the pccam function 5.2 Removable Storage device Select the USB mode to “Mass Storage”, this product will be a removable storage device. Download files from this product to your PC: 1. Connect this product with PC by USB cable; 2.
Notice: Do not open the battery door to take out the battery or SD card when you download files, or else, it may cause damage of the file. 6.
ISO Auto PCCamera 640x480 Color Normal, brown, B/W PC connecting USB Video output NTSC/PAL Displayer Power 3.0" TFT color LCD, ,resolution :640X240 Lithium battery 3.7V/800mAH OSD language English, Focus F = 7.36mm Aperture F = 3.2 Focus range 1.5m to infinite Auto shutoff Operation French, German, Spanish, Italian, none,60Sec、2Min Microsoft Windows 98SE, ME, 2000, XP, Vista If you need help, please contact Argus Camera Company Technical Support Email – support@arguscamera.