Operation Manual

ARGUS
104
A
RGUS 125
Automatic Start the test series from the Test reports
menu.
If the automatic test series is started by pressing
function key 4, you must first enter a name for it to be
saved under.
Select a memory location (record)
Select “Start”
Accept the suggested record name or enter a new
name (see page 102).
Enter Own number; on accesses using the DSS1
protocol, also enter the remote number.
Use the cursor keys to select the service.
(required for the suppl.serv.test)
Start the automatic test
During the test sequence, the ARGUS will display the
current single test.
Interrupting a test
Enter own number
Select service