Operation Manual

ARGUS
120
A
RGUS 125
16.2 Settings: ISDN
The operation is the same for all configurations and will be illustrated with a single example:
The ARGUS - Main menu
Use the cursor keys to select, e.g. Protocol.
Use the cursor keys to select the setting for the protocol
(e.g. Automatic).
Settings in ISDN:
The ARGUS will return to the “ISDN config.”
menu without making any changes.
Name Displayed
on the ARGUS
Comment
L1 permanent? On a BRI connection in NT mode, Layer 1 (L1) is permanently
active.
Protocol As an alternative to automatic protocol determination (setting:
Automatic), you can also set the Layer-3 D-channel protocol
manually. The ARGUS will save the protocol setting permanently,
i.e. it will use this protocol the next time that it is switched on.
The ARGUS saves the
settings and returns
to the next higher menu.