Operation Manual

ARGUS
128
A
RGUS 125
16.4 Settings: POTS
The operation is the same for all configurations and will be illustrated with a single example:
The ARGUS - Main menu
Using the cursor keys, select a setting (e.g. POTS dial
mode).
Use the cursor keys to select the desired dialling mode
(e.g. Pulse mode).
Settings on a POTS access:
The ARGUS will return to the “POTS config.”
menu without making any changes.
Display on
ARGUS
Comment
Dial mode Selection of the dialling mode: DTMF or pulse dialing
CLIP mode Select the transfer procedure used to pass the call number:
FSK
DTMF
CLIP via a method similar to a modem
(for Germany as well as some other parts of
Europe)
CLIP via DTMF
(for Scandinavia and the Netherlands)
The ARGUS will automatically detect that a CLIP
was sent using DTMF with the polarity reversal
and will set itself accordingly (e.g. Netherlands).
DTMF parameter Settings for the three parameters Level, Duration and Interval of
the DTMF signals generated during POTS (analog) operation.
Select the dialing
mode:
select
The ARGUS saves the
setting and returns to the
next higher menu.