Operation Manual

ARGUS
A
RGUS 125 129
Level Setting the DTMF level:
The level can range between -30dB and +9 dB (default: -3dB).
Use the vertical cursor keys to raise or lower the level by 3dB.
Duration Setting the DTMF time:
The duration of the signal can take a value between 40ms and 1s
(default: 80ms).
Use the vertical cursor keys to raise or lower the value.
In the range
In the range
In the range
40 - 200 ms
200-300 ms
300 - 1000 ms
10 ms steps
20 ms steps
100 ms steps
DTMF interval Setting the interval between two DTMF characters:
The interval between the characters can take a value between
40ms and 1 second (default: 80ms).
Use the vertical cursor keys to raise or lower the value.
In the range
In the range
In the range
40 - 200 ms
200-300 ms
300 - 1000 ms
10 ms steps
20 ms steps
100 ms steps
Defaults Restores the default settings: Level = -3 dB, Time = 80 ms,
Separation = 80 ms
FLASH time Sets the length of a FLASH.
This setting is needed in order to use special features of a PBX.
The FLASH time can take a value between 40ms and 1s.
Use the vertical cursor keys to raise or lower the value.
In the range
In the range
In the range
40 - 200 ms
200-300 ms
300 - 1000 ms
10 ms steps
20 ms steps
100 ms steps