Operation Manual

ARGUS
132
A
RGUS 125
Enter date /
time
Entry of the date and time (initialisation of the internal clock) via
the keypad.
Use the vertical cursor keys to scroll to the next line in the display.
The entered time will be continuously updated by the ARGUS’s
real time clock as long as the power is not interrupted. When the
power is switched off (the ARGUS switched off without
accumulators), the clock will run a few more weeks on its internal
supply. If the backup supply is exhausted, the time will be
undefined and must be set again.
PC Interface Select the interface to be used for connecting to the PC.
Default setting: USB
V.24 Baud rate Sets the maximum baud rate to be used by the ARGUS to
communicate with a PC via the V.24 interface.
Alarm bell The ARGUS signals with an alarm in a variety of situations, e.g.
when a bit error occurs in a BERT. When this parameter is set to
"off“, all audible alarms are suppressed.
Power Down - Set the how long the ARGUS can remain idle before it will switch
to power down mode. If power down mode is disabled, the
ARGUS will display a message, when it is switched on, warning
that this will lead to a shorter battery life.
- Setting how long the background lighting will remain on.
Software
option
To enable a software option (e.g. additional functions), you must
first enter a software key via the keypad.