Operation Manual

ARGUS
A
RGUS 125 23
6 Start-Up
Using the included cable connect the ARGUS to the access to be tested and then switch
the ARGUS on by pressing the -key.
The ARGUS displays the access and mode parameters which were last selected.
Indicates the level of the
accumulators’ charge when
the ARGUS is operated
without the power supply.
Current assignment of the
softkeys
Activation of the displayed
parameter. The ARGUS starts the
initialization phase and then shows
the status display (see page 26).
The displayed parameters
will not be accepted. The
Access menu will now
open (see page 32):
Type of access
Marked
access type
Name of the menu
Operating mode
Press
The ARGUS will set the type of access to the one marked with the .
The Access mode menu will open.
Press
Return to the previous display without changing to marked type of
access
Press
Select a type of access; the selected type will be marked with a  (in
the example, S-bus interface)
Accu Servicing,
see page 136