Operation Manual

ARGUS
32
A
RGUS 125
7 Setting the Type of Access
If the parameters displayed at power on are not accepted, the Access menu will open
automatically. However, you can also open the Access menu at any time from the Main
menu.
In the Access menu, the user must select the type of physical access to which the ARGUS
is actually connected. When the ARGUS is restarted, the settings used last will be
suggested as the default.
If you use the ARGUS on a BRI
in an ISDN system, whose specifications deviate from the
(DIN ETS 300 102) standard, such as those of some networked PBXs, you must take these
manufacturer-specific modifications into account. In such cases, please contact the
distributor of your ISDN PBX for assistance.
Open the Main menu
Using the cursor keys select the Access menu.
Using the cursor keys mark the desired type of
access.
The following applies for all displays:
Press to confirm your selection
The Access Mode menu will open
automatically (see page 33).
The ARGUS will return to the previous
display and ignore any changes to the
settings.
In this case, the ARGUS would e.g. use
the "old" access.
ARGUS State