Operation Manual

ARGUS

RGUS 125 33

8 Selecting the Access mode

The Access mode menu is not selectable from the

Main menu.

It opens automatically once the physical access is

selected in the Access menu.

Using the cursor keys, select the desired Access

mode.

8.1 Operation on a BRI, U-Interface or PRI access

8.1.1 TE-Simulation mode

TE automatic

On a BRI or U-interface access, the ARGUS will automatically determined the D-

channel Layer 2 mode (PP or P-MP). If the ARGUS determines that the access

supports both modes, a configuration menu will open in which you can select the

desired L2 mode

TE P-P or TE P-MP

Afterwards, the access and the protocol stack will be initialized in accordance with the

selected setting. When the ARGUS finds a PRI access, it will enter P-P mode.

8.1.2 NT-Simulation mode

NT P-P or NT P-MP

Afterwards, the access and the protocol stack will be initialized in accordance with the

selected setting. When the ARGUS finds a PRI access, it will enter P-P mode.

Confirm the Access mode

The ARGUS will open the State display.