Operation Manual

ARGUS
A
RGUS 125 41
8.1.4 BRI/PRI Monitor
The ARGUS accepts all of the D-channel signals from the BRI or PRI access and sends
these D-channel signals over the serial interface to a PC, which must be running ARGUS
WINplus or WINAnalyse. The bus and Layer 1 are not influenced by the monitoring.
Monitoring a BRI access
Monitoring is not yet active!
Start monitoring
The ARGUS displays the recording time in h:min:sec
and the number of recorded signals.
Listening-in on voice data
Enter the B-channel from the keypad (first press
<DEL>) or use the cursor keys to set the B-channel.
The ARGUS will switch the handset to this B-
channel.
It is now possible to listen to the voice data (in the
direction Network ---> User).
Stop monitoring.
<LOUD> to increase the listening volume
<QUIET> to stop listening
ARGUS State display
<START>
B-channel select