Operation Manual

ARGUS
A
RGUS 125 45
Display of the L1 Status in PRI Monitor mode
The L1 status function is only available in PRI Monitor mode. The Layer 1 alarms and
messages are presented in several windows, which permit detailed statements regarding
the state of the PRI access and the transmission line (For further information, see the
CCITT/ITU guidelines G.703 and G.704).
The ARGUS is in PRI Monitor mode
Monitoring is not active.
Display of the "TE-side parameters"
Use the cursor keys to scroll through the display.
For a comprehensive explanation of the displayed
information: see “The L1 Status of a PRI Access” on
page 116.
< NT > Switch to “L1 status NT”; the “NT-side
parameters” will be displayed
<RESET> Reset the History function
Quit.
The ARGUS returns to the Main menu.