Operation Manual

ARGUS
64
A
RGUS 125
10.1.2 BERT wait
In “BERT wait” mode, the ARGUS will wait for the BERT at the remote end which is
necessary for an end-to-end test:
ARGUS in the Single tests menu
Activate “BERT wait”
The ARGUS first waits for a call and then sets up the
connection. During the connection, the received bit
pattern will be evaluated and an additional
independent bit pattern will be sent.
The ARGUS displays that will appear are the same as
those in Chapter 10.1.1 Start BERT .
< TM > Opens the Test Manager (page 96)
Exit “BERT wait” mode