Operation Manual

ARGUS

RGUS 125

10.9 Traffic generator (only on a PRI access)

The ARGUS will automatically setup as many as 30 connections and will display which B-

channels on the PRI access are available for incoming and outgoing calls.

ARGUS in the Single tests menu

The speed-dialing memory opens.

Use the cursor keys to scroll to desired the number or

reenter the number on the keypad.

Use the cursor keys to select Service

Enter the number of channels on which the ARGUS

should setup connections.

Use the cursor keys to move to “Begin with”: Enter the

B-channel on which the first connection should be

setup. All further connections will be setup on the

sequentially following B-channels.

Enter the call interval (pause between outgoing calls)

Valid values are between 100ms and 15000ms. If the

call interval is too short, some exchanges will have

problems handling the calls.

Start the test

During the test the ARGUS will show the number of

connections setup (in this example 15) and, as marked

squares, the channels in use.

In the example, channels 1 to 15 are in use for

outgoing connections (top row of squares).

<DEL> Delete the digit before the cursor

Enter the phone

Select service

Enter the B-channels

Enter the call

interval