Operation Manual

ARGUS
88
A
RGUS 125
11.1 Overlap sending (outgoing call)
In overlap sending, the digits entered for the call number are sent individually.
ARGUS in the Single tests menu
Using the cursor keys select the service that
should be used for the connection.
Enter the B-channel via the keypad (as the default
setting, the ARGUS will suggest the last B-channel
used). When entering a new B-channel, first press
the DEL softkey. If you enter an *, the ARGUS will
choose any B-channel that is free.
The ARGUS will show whether the B-channel is
available.
Setup the connection
Enter the number on the keypad.
The ARGUS displays the service (e.g. Tel.), the
own number (90700), the B-channel (B02) and the
number called (01191), the call reference (CR
value) as well as its length and flag.
The connection is set up using B-channel 2.
The ARGUS will open the Outgo.call Tel.
display
<TM> Starts the Test Manager (page 96)
or
Disconnect
View additional information (if available)
- Subaddress of the caller
- Destination number
- User-to-User Information
- Display Information
- Type of number (TON)
<LOUD> switch to LOUD
<TM> Starts the Test Manager (page 96)
Select service
Enter the B-channel