Operation Manual

ARGUS

RGUS 125

11.2 En-bloc sending (outgoing call)

In en-bloc sending, the ARGUS sends the entire dialing information in one block. The

number is dialed from the call number memory (page 133).

ARGUS in the Single tests menu

Use the cursor keys to select the number from the

speed-dialling memory or reenter the number on

the keypad.

Enter the B-channel on the keypad (for details on

entry, see “Overlap sending”).

Start the dialing procedure

(for more displays and information see Overlap

sending)

The ARGUS displays the cause of the disconnect

(see page 93), the call reference as well as its

length and the associated flag.

<DEL> Delete the digit before the cursor

The ARGUS will open the Outgo.call Tel.

display

<LOUD> switch to LOUD

<TM> Starts the Test Manager (page 96)

Disconnect

Select service

Enter the B-channel

Enter the phone number