Operation Manual

ARGUS
A
RGUS 125 91
11.3 Redial (outgoing call)
The ARGUS will set up a call using the last number dialed.
ARGUS in the Single tests menu
Enter the B-channel via the keypad (as the default
setting, the ARGUS will suggest the last B-channel
used). When entering a new B-channel, first press the
DEL softkey. If you enter an *, the ARGUS will choose
any B-channel that is free.
The ARGUS will show whether the B-channel is
available.
The dialing procedure will begin using the number
which was dialed last.
For more displays and information, see Overlap
sending.
<LOUD> switch to LOUD
<TM> Starts the Test Manager (page 96)
or
Disconnect
Select service
Enter the B-channel