Operation Manual

ARGUS
A
RGUS 125 97
12.1 Starting Several Tests to Run Simultaneously
Starting a new test or connection during an existing connection
An example:
There is a connection on B-channel 2.
During this connection, the Test Manager is opened
(or started by pressing the -key. The ARGUS will
display the number of existing connections (-/01).
Select “Start new one”
Mark “Single tests”
Select the desired test (e.g. bit error test).
Start test (still connected)
For information on running a BERT, seepage 59
The ARGUS opens to the Test Manager.
Mark “Outgo.connect.”
If a test (or connection) is cancelled/cleared, the ARGUS will return to the Test Manager if
there is another test (or connection) running in the background.
The ARGUS will open
the Connection display.
Tests 1/03 B02
An example of
The connection
was the first
started
There are currently two
active connections or
tests
The connection
uses B-channel 2