Operation Manual

ARGUS
A
RGUS 125 99
Accepting an incoming call/connection when a test is running.
The ARGUS signals an incoming call both audibly and on the display (see page 87 ISDN
connection). The incoming call can be accepted without influencing the currently running
test. If either the B-channel loop or BERT wait function is active, the call will be accepted
automatically.
The manner that multiple connections are handled is illustrated in the following example of
"Accepting an incoming call during a BERT", but it is identical for all other tests.
While running a BERT, the ARGUS displays
information about an incoming call.
To take the call.
The BERT will continue in the background.
Select “BERT outgoing”.
The ARGUS jumps to the BERT.
The connection is still active in the background, the
handset is still switched to the connection.
If available, the internal handset will be assigned to the currently started (voice)
connection. The assignment of the handset to a given connection is also retained
in the background.
<REJECT> Reject the incoming call.
The ARGUS returns to the BERT.
or