Datasheet

9 VoIP test
ARGUS 141 107
User agent ID-string or terminal type which will be sent to the called
party.
Default setting: Argus141

For information on the softkeys, see page 105
Type of
service
Entry of the Type of Service. The Type of Service (ToS) is
used to prioritorize the handling of VoIP data in the
Internet (thus voice data is - when possible - transferred
faster).
Default setting: 18

For information on the softkeys, see page 105
Qualify Specifies whether or not the proxy server’s availability
should be checked continuously.
Default setting: No
Registrar
expire
Specifies how long a registration with the Registrar
Server is valid.
Range: 10 to 6000 seconds
Default: 3600 seconds
Del.exist.
registrar
Delete the registration with the Registrar Server. When
set to "yes“, the ARGUS will be exclusively registered
with the registrar server. If it is set to "no“, it will be put in
the list of existing registrations.
Default setting: yes
Phone
Settings
Call
acceptance
Selection of the type of call acceptance. If “Echo Test” is
selected, incoming calls will be accepted automatically
and the speech data will then be looped back.
Default setting: manual
Silence
detection
If this is set to “on”, ARGUS will not send speech packets
when there is silence (a break in the speech). This can,
however, lead to problems with the assignment of ports if
there is a NAT router.
Default setting: off
Jitter buffer Sets the size of the jitter buffer static or adaptive.
Default setting: static
Static jitter
buffer:
Entry of the size of the static jitter buffer
Range: 20 to 200 ms
nominal: 60ms