Datasheet

6 Operation on an ADSL Access

ARGUS 141 43

Connection successfully setup

Once the connection has been setup (“Sync / L1” LED on constantly and a green LED will

be shown in the display), the ARGUS will determine and display the ADSL connection

parameters. After the ARGUS has synchronized, please leave it connected to the ADSL

access for at least another 20 seconds since the ADSL connection parameters cannot be

stored in the ARGUS until this period of time has elapsed.

ARGUS – State display.



Display:

If the current data rates on the ADSL

connection exceed the rated values (see

page 34), the ARGUS will display "OK“,

otherwise it will display "FAIL“.



Display the ADSL connection parameters

in brief. 

- d/f: downstream/far 

- u/n: upstream/near

- Access Mode

- Default (preset) profile

-ADSL mode

- Duration of the setup connection

- Interface's DC voltage

d: Downstream data rate

u: Upstream data rate

<Edit> The preset profile (in this

example, Profile 1) will be

displayed. The ADSL access

parameters are disabled. The

other settings can be edited

here (see page 34).

<Menu> Open the Main menu.

<Stop> Clear down the ADSL

connection.



Scroll through the connection

parameters.

<Trace> Display the trace data.

Continuation on