Technical data

15 Configuration
121
ARGUS 3u plus/3u NT
Bit pattern BRI/U
This function is used to select the bit
pattern to be sent cyclically by the
ARGUS to perform a BERT on a BRI or
U-interface access.
Several predefined bit patterns are
available
(default setting = 2
15
-1).
Additionally, it is also
possible to enter a 16 bit
long pattern of your choice
in binary from the keypad.
To move the cursor right or
left, use the ↑ , ↓ -Keys.
<DEL>: Set the digit in
front of the cursor to 0
Saving the bit pattern