Technical data

15 Configuration
127
ARGUS 3u plus/3u NT
Settings on the ARGUS:
Display on
ARGUS
Comment
Menu language Selection of the menu language
LCD contrast Setting the display contrast
(The contrast can be changed in 16
steps).
The contrast can be increased or
decreased using the ↑ , ↓ -Keys:
The display shows a vertical arrow,
which shows the current setting on a
scale from low to high contrast.
Baud rate Sets the maximum Baud rate to be
used by the ARGUS to communicate
with a PC.
Alarm bell The ARGUS signals with an alarm in a
variety of situations, e.g. when a bit
error occurs in a BERT. When this
parameter is set to "off“, all audible
alarms are suppressed.
Feed In the "only normal" setting, the
ARGUS will automatically draw its
power from one of the following
sources (in this order):
power supply, BRI network or
accumulators.
On some accesses, powering the
ARGUS from the BRI line may lead to
trouble. Therefore, you can switch off
the option for feed from the BRI
network.
(setting: "no line power“)