Technical data

15 Configuration
129
ARGUS 3u plus/3u NT
15.7 Saving Call Numbers
Ten call numbers with a maximum of 24-places can be
entered in the speed-dialing memory.
The first speed-dial number must be the own call
number of the access under test (this is especially
important for the automatic Service test).
In the Remote No.1-8 memory locations, you can
save remote call numbers. In the memory location X.31 test
number , the ARGUS expects the entry of the X.25 access
number for the X.31 test (see Chap. 9.4 page 68).
In the Main menu, use the <
↓ >
Select Configuration.
Use the < ↓ > to select
Numbers.
Enter the number of the
access under test on the
keypad.
Press < DEL > to delete the
digit before the cursor.
Using the < ↓ >-Key scroll
through the speed-dialing
memory.
Save the call number.
When entering an own call number with an extension
(operation of the ARGUS on a PBX access), observe the
following:
The extension is separated from the access number by a #.
For outgoing calls, the ARGUS uses the entire call number
(without #) as the number called (CDPN or DAD) and, for the
calling number (DSS1-CGPN or 1TR6-OAD), only the
number after the #, in other words the extension. A "#" at the