Technical data

16 Accu servicing
134
ARGUS 3u plus/3u NT
16.2 Manual accumulator servicing
(charging/discharging)
The ARGUS will display the current charge of the
accumulators, if no power supply is connected.
When the power supply is connected, the accumulators in
the ARGUS can be completely discharged or also
recharged immediately - without being first discharged. The
discharge procedure takes up to 6 hours. The ARGUS will
automatically begin recharging the accumulators after a
break of about 30 minutes (depending on the capacity of the
accumulators, it can take up to 7 hours to recharge them).
In the Main menu, use the <
↓ >
select Accu servicing.
Open the Accu servicing
menu
Use the < ↓ > to select
Charging.
Start charging the
accumulators
(the plug-in power supply
must be connected)
The ARGUS will display the
level of the charge and the
voltage while charging the
accumulators.
Discharging the
accumulators
The accumulators will first
be fully discharged and then
- after a brief pause -
automatically recharged.