Technical data

8 Select the Access Mode

ARGUS 3u plus/3u NT

Loopbox with a permanent circuit

A loopbox can be setup for the permanent circuit by

selecting in the Single tests menu / Bit error test submenu

/ the B-channel LOOP (see “B-channel loop” on page 67).

The Channel select window

will open.

When "B-channel" is

selected, the Loopbox is

setup for both B-channels.

If "All framed" is selected, not

only both B-channels but the

D-channel will also be

looped.

Activate loopbox

The ARGUS will display the

channel used (B01) and the

amount of time (h:min:sec)

that the Loopbox has been

active.

On a BRI

Loopbox

stop