User Guide

2. Hold down Shutter within 3 seconds and it will take 3 photos
continuously. If it is not operated within 3 seconds, LCD will return to Preview
status from Menu options.
Prompt:
Poor light in continuous shooting may cause incorrect exposure, affect
photo quality or result in failure in photo taking (in case of failure, your
camera will give off two “beeps”).
Deleting Last Photo
After camera is activated, press Mode four times and LCD will display “
”. Press Shutter within 3 seconds to delete the last photo. If it is not operated
within 3 seconds, LCD will return to Preview status from Menu options.
Deleting All
After camera is activated, press Mode three times and LCD will display
“ ”. Press Shutter within 3 seconds and LCD will flash continuously. Press it
again to delete all photos. If it is not operated within 3 seconds, LCD will
return to Preview status from Menu options.
Hi/Lo Shift
After camera is activated, press Mode Function 5 times and LCD will
display “ ”. Press Shutter within 3 seconds and LCD will display “ ”. This
mode shift between Hi ( ) and Lo ( ).LCD will return to Preview status
from Menu options if it is not operated within 3 seconds, To resume “ ”
status, just press Mode 5 times again and LCD will display “ ”. Press Shutter
within 3 seconds, LCD will display “ ”.
Image Compression/Processing Mode Shift:
After camera is activated, press Mode 6 times and CSTN will display “ ”
- 9 -