Specifications

HP OpenVMS Version 8.4 for Integrity and Alpha servers SPD 82.35.19
MDS600 SAS storage system
D2600 12 LFF 6Gb SAS/SATA disk enclosure
D2700 25 SFF 6Gb SAS/SATA disk enclosure
Miscellaneous Options
AB552A OpenVMS Keyboard and Mouse
A9803A Management Processor Card (for out of band
management and basic 2D graphics)
AB551A Radeon 7500 Graphics 2D/3D Adapter
AD307A HP lights out advanced/KVM card. This card is
supported on rx76xx, rx86xx, and Superdome.
A6869A 1-port VGA DB15 + 2-port USB 2.0 PCI Card.
USB port is supported on rx76xx, rx86xx, and
Superdome. VGA port is not supported.
571956-
B21
HP Virtual Connect FlexFabric 10 Gb/24-port
module.
APPENDIX B (OpenVMS Alpha)
This appendix lists the options supported on OpenVMS
Alpha. Some restrictions for specific devices are listed.
HP reserves the right to change the number and type
of devices supported by OpenVMS Alpha, DECnet for
OpenVMS Alpha, DECnet-Plus for OpenVMS, TCP/IP
Services for OpenVMS, and OpenVMS Cluster soft-
ware. The minimum hardware requirements for future
versions and updates of these software products may
be different from current hardware requirements. For
configuration details about Alpha or VAX hardware, see
the Systems and Options Catalog and the Network and
Communications Buyers Guide.
See the following SPDs for detailed product information:
DECnet for OpenVMS (SPD 48.48.xx), DECnet-Plus
for OpenVMS (SPD 50.45.xx, 25.03.xx), TCP/IP Ser-
vices for OpenVMS (SPD 46.46.xx), OpenVMS Cluster
(SPD 29.78.xx), and Open3D for OpenVMS Alpha (SPD
45.08.xx).
Terminals and Terminal Line Interfaces
To prevent input from overflowing a buffer, terminals use
the ASCII control characters DC1, also known as XON,
and DC3, also known as XOFF, for synchronization as
defined by HP STD 111, Revision A. VXT windowing ter-
minals support standard ANSI applications and X Win-
dows Systems using the LAT transport protocol.
OpenVMS Alpha supports the VT200 series, VT300 se-
ries, VT400 series, VT500 series, and VXT2000 series
terminals.
Disks
The following table lists the disk drives that are sup-
ported on OpenVMS Alpha, the bus the device is sup-
ported on, and the minimum required version of Open-
VMS Alpha that supports the device.
Disk Drive Description Bus
Min. Alpha
Version
RRD42 600 MB read-only
optical disk drive
SCSI 1.0
RRD43 680 MB read-only
optical disk drive
SCSI 6.1
RRD44 680 MB read-only
optical disk drive
SCSI 6.1
RRD45 600 MB 4x read-only
optical disk drive
SCSI 6.1
RRD46 600 MB 12x read-only
optical disk drive
SCSI 6.2-1H3
RRD47 600 MB 32x read-only
optical disk drive
SCSI 6.2-1H3
RX26 2.8 MB diskette drive SCSI 1.0
Note: The preceding list is incomplete in terms of cur-
rently shipping disk and tape devices; it changes fre-
quently. Supported disk and tape devices are reflected
in the AlphaServer Supported Options Lists that can be
found at the individual AlphaServer web pages:
http://h18002.www1.hp.com/alphaserver/
Click on the requested AlphaServer, and then access
links from the left-hand columns under Technical Infor-
mation, followed by Supported Options. From there, you
can sort by the type of option.
Tapes
The following table lists the tapes that are supported on
OpenVMS Alpha, the bus the device is supported on,
and the minimum required version of OpenVMS Alpha
that supports the device.
35