User Guide

Argus QCV-011 Digital Photo Album

Instruction Manual

Specifications

Supported Formats: BMP, JPEG, PNG, GIF

Connection: USB 1.1

Picture Storage: Up to 56 Pictures

Power: Built in Rechargeable 3.7V Lithium Battery via USB cable from computer

Screen: 1.1 inch LCD

Install Driver and Photo Album Software

1. Insert the CD into your computer’s CDROM drive.

a. Double-click “Setup.exe” in the window that opens.

b. Follow the on-screen prompts to install the Photo Viewer software.

2. Using the included USB cable, connect the Digital Photo Album to a USB port on your

computer.

a. The Found New Hardware Wizard appears. The dialog will ask “Can Windows connect to

Windows Update to search for software?” Select “No, not this time” and click “Next”.

b. The next dialog will ask: “What do you want the wizard to do?” Select “Install the software

automatically (Recommended)” and click “Next”.

c. If the Windows Logo warning appears, click “Continue Anyway”.

d. Click “Finish”.

Operating Instructions

Button 1 [Power/Play/Auto play/Stop]

Turn on/off: Press button 1 for three seconds then release. A beep will indicate that the unit is

on, repeat to turn off.

Auto Off: Unit will turn off automatically after 3 minutes in Manual mode. When the unit is set to

Auto mode the album will operate continuously without turning off.

Auto Play (Scrolling) / Manual Mode: Press and immediately release button 1 will switch the

viewer to Auto Play. Press and release this button again to enter manual mode. To activate Auto

Play, there must be at lease two images stored on the viewer.

To pause: during auto play, press and hold button 2.

Button 2 [Next / Delete All]

Next: In Manual Mode, pressing button 2 will advance to the next image.

PAGE 1
Argus QCV-011 Digital Photo Album Instruction Manual Specifications Supported Formats: BMP, JPEG, PNG, GIF Connection: USB 1.1 Picture Storage: Up to 56 Pictures Power: Built in Rechargeable 3.7V Lithium Battery via USB cable from computer Screen: 1.1 inch LCD Install Driver and Photo Album Software 1. a. b. 2. a. b. c. d. Insert the CD into your computer’s CDROM drive. Double-click “Setup.exe” in the window that opens. Follow the on-screen prompts to install the Photo Viewer software.
PAGE 2
Delete All: To delete all the photos, press button 2 for two seconds. “DELETE ALL?” will flash on the screen. Press button 1 to confirm deletion; press button 3 to cancel action. When DELETE ALL has flashed 4 times, the process of deleting will be cancelled. Button 3 [Previous / Delete] Previous: In Manual Mode, press button 3 to display the previous image. Delete Current: To delete the current photo, press button 3 for two seconds. “DELETE CURRENT?” will flash on the screen.