Owner's manual

Page 2-8 Rev. 0040805005 3614
Operating and installation instructions
CONA
®
S - Ball float steam traps
- Form-fit new diaphragm capsule (Pos. 24.4) to seat (Pos. 24.1).
- Push spring clip (Pos. 24.5) radially into slot of seat (Pos. 3), at the same time pushing the
two angled ends of the spring clip legs (Pos. 24.5) onto the diaphragm capsule
(Pos. 24.4).
- Gehäuse (Pos. 1), Regler kpl. (Pos. 24) sowie alle Dichtflächen reinigen.
- Assemble in reverse order (see 7.3).
Fig. 3: Controller series 637/638, cpl.