Installation Guide

1 2
Dry t Aria Vent body piece
in opening.
Apply adhesive bonding
material in tray. Insert pre-cut
ooring material.
3
Hold in place. Flip tray upside
down. Apply even pressure
until ooring material lies at
with rim of tray.
4
Leave bonding material to
cure.
6
Insert tray. Slide in place.
Enjoy!
To open air ow, push down the
dampers in body. This can be
done anytime after install.
Custom Vent Solutions
Materials Needed
- Pre-cut piece of surface material for tray insert. (Size will vary
for vent sizes).
- Bonding material (will vary for ooring materials).
*Control Air Flow*
Slide to remove tray and adjust ange open and closed. For optimal air ow, push
anges past 90º.
Additional Support
[e-mail] / www.ariavent.com
OG Collection - Installation Guide
5