User's Manual

ManualsBrandsAriakon ManualsPaintballAriakon Overlord

Phone: 1-877-4-ARIAKON

PHONE: 760-268-0735

FAX: 760-268-0736

Email: sales@ariakon.com

2794 LOKER AVE WEST

SUITE 107

CARLSBAD CA 92008

ARIAKON, SIM, SIM-4, SIM-5, SIM-5N, SIM-15, TORO, ACP, ARIAKON COMBAT

PISTOL and OVERLORD are trademarks of ARIAKON™

Any use or reproduction of materials, images, names, or logos found in this manual is

strictly prohibited.

Thank you for choosing ARIAKON™.

ARIAKON™

www.ariakon.com

ARIAKON Manual Revision 1.0

Read and understand the entire contents of this

manual before attempting to use your marker!

PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com

Summary of content (8 pages)

PAGE 1
Thank you for choosing ARIAKON™. ARIAKON™ www.ariakon.com 2794 LOKER AVE WEST SUITE 107 CARLSBAD CA 92008 Phone: 1-877-4-ARIAKON PHONE: 760-268-0735 FAX: 760-268-0736 Email: sales@ariakon.com ARIAKON™ All Rights Reserved. ARIAKON, SIM, SIM-4, SIM-5, SIM-5N, SIM-15, TORO, ACP, ARIAKON COMBAT PISTOL and OVERLORD are trademarks of ARIAKON™ Any use or reproduction of materials, images, names, or logos found in this manual is strictly prohibited.
PAGE 2
Page 1 Page 14 Repair Authorization Form WARNING THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR DEATH. PROPER EYE AND FACE PROTECTION DESIGNED FOR PAINTBALL MUST BE WORN AT ALL TIMES BY THE USER AND ANY OTHER PERSON WITHIN RANGE. THIS PRODUCT IS NOT INTENDED FOR UNSUPERVISED USE BY PERSONS UNDER THE AGE OF 18. READ THE OWNERS MANUAL BEFORE USING THIS PRODUCT. This form must be included with your return.
PAGE 3
Page 2 Page 13 TABLE OF CONTENTS WARRANTY TERMS AND AGREEMENTS LIMITED 1 year WARRANTY ARIAKON™ products are warranted for 1 year from the original date of retail purchase. During the warranty period, any part, because of manufacturing defects or workmanship, that fails to function properly under normal use shall be repaired or replaced, at ARIAKON‘S™ sole discretion, free of charge. This product must be operated in accordance with the instructions included with the unit.
PAGE 4
Page 3 Page 12 TROUBLESHOOTING WARNING AND LIABILITY STATEMENT Make sure the marker has been properly reassembled. Refer to “Basic Maintenance and Cleaning” on page 10. The marker will Make sure the trigger frame (part# 24) is not cock properly attached to the marker. The longer trigger frame screw (part# 23) should be in the front and the shorter in the rear. Increase the velocity by turning the velocity adjustor (part# 22) clockwise.
PAGE 5
Page 11 Page 4 TROUBLESHOOTING • Never point the marker at anything you do not intend to shoot. • Only use paintball markers where it is legal and/or approved. • Always keep the muzzle pointed down or in a safe direction. • Use only .68 caliber paintballs. Never load or attempt to fire any other objects. • Wear proper attire and avoid exposing any skin when playing the game of paintball. • Keep exposed skin away from escaping CO 2 gas when installing or removing the cylinder.
PAGE 6
Page 5 Page 10 GETTING STARTED IMPORTANT: Paintball approved eye and face protection must be worn at all times when handling this or any other marker. Always make sure that when not actively firing the marker in a paintball game, the marker is in “safe” mode and the barrel plug or barrel cover is properly installed. 1) Magazine Clip - Removing and Attaching To remove the magazine clip (part# 1) slide the release lever upward.
PAGE 7
Page 9 Page 6 BASIC CLEANING AND MAINTENANCE UNLOADING YOUR MARKER NOTE: Basic maintenance of your ARIAKON™ marker is your responsibility. Your marker will provide you with dependable performance for many games if properly cared for. Not properly maintaining your marker could result in voiding your warranty. WARNING: Before conducting any maintenance, remove the air source and magazine from your marker. Make sure there are no paintballs left in the marker (Refer to “Unloading Your Marker”).
PAGE 8
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com 1. Magazine 2. Magazine Plug 3. Ball Detent 4. Air Passage Cover 5. Air Passage Cover Screws (2) 6. Bolt 7. Connector Pin 8. CO2 Cap 9. Body 10. Velocity Spring Guide Pin 11. Striker Cushion 12. Velocity Spring 13. Striker 14. Puncture Valve 15. Puncture Pin 16. Cup Seal 17. Main Valve 18. Trigger 19. Sear 20. Retaining Pin 21. Velocity Lug 22. Velocity Adjustor 23. Trigger Frame Screws (2) 24. Trigger Frame 25.