Instructions / Assembly

1. The recommended rough-in distance between the center of the closet ange and
the wall is 12”.
2. The recommended distance between the center of the closet ange and the water
supply valve on the wall is 9” to 11”, depending upon the toilet model.
3. The recommended distance between the water supply valve and the oor is 11.5”.
1. Check the water level in the tank. The water level should reach the waterline
for the overow pipe when the tank is full. If not, you will have to use the
following guidelines for adjusting the water level.
2. Flush the toilet and check for leaks between connecting sections while the toilet is
ushing.
RECOMMENDED
MEASUREMENTS
TESTING OPERATION
PAGE 9