Instructions / Assembly

Please note, two people are needed
during installation to place the toilet.
NOTE: The toilet ange is referred to
as the drain socket ange, and the oor
ange is referred to as the closet ange
for the purposes of this manual.
Before installing this product, note the
required and recommended water
supply line pressure is between 20
and 80 psi.
Before installing your new toilet, the
rough-in distance needs to be checked.
The distance between the oor drain
and the water supply valve also needs
to be checked. Please reference the
“Recommended Measurements”
section and the measurements for the
model you have purchased.
Cleaning products prevent bacteria
from growing on the surface of this
product. While the cleaning products are
antibacterial, it cannot be ensured that
all bacteria are destroyed.
PRECAUTIONS BEFORE
INSTALLATION
Oil, lm, dust and other particles may
come in contact with the product during
transportation and shelf life.
ANY and ALL residue must be removed
from the closet ange.
The old closet ange bolts may need to be
replaced.
PAGE 3