Instructions / Assembly

INSTALLATION
CONT’D
1. Measure the thickness of the toilet skirt. It is recommended to add 1/8” to this
measurement. Measure this total measurement (thickness of the toilet skirt plus
an additional 1/8” as recommended) in from the tape marks made in Step 9 of the
previous section. Mark for placement of the L-mount brackets.
2. Dry t the L-mount brackets and mark the pilot hole for each L-mount bracket.
3. Drill the 2 pilot holes and insert the L-mount bracket anchors into the pilot holes.
4. Replace the L-mount brackets and secure them with the screws.
INSTALLATION OF THE L-MOUNT BRACKETS
PAGE 6