Installation Guide

ManualsBrandsAriel ManualsBathWS-803A 55 in. x 35 in. x 86 in. Steam Shower Enclosure Kit in White

Your best choice!Your best choice!

STEAMROOM PACKING DIAGRAM:

Include: side body, back body, aluminium

board, glass door.

Include: top lamp, top shower, exhaust fan, tray,

drainage.

Include: drainage pipe, seat, foot massage, remote

control, handle, Chain wheel 4pcs, screws: 10pcs

M6X25, 18pcs M6X35, 20pcs st4X20, 6pcs st4X25.

Summary of content (7 pages)

PAGE 1
STEAMROOM PACKING DIAGRAM: Include: top lamp, top shower, exhaust fan, tray, drainage. Include: side body, back body, aluminium board, glass door. Include: drainage pipe, seat, foot massage, remote control, handle, Chain wheel 4pcs, screws: 10pcs M6X25, 18pcs M6X35, 20pcs st4X20, 6pcs st4X25.
PAGE 2
1. Please ensure that the product installed reliable electric leakage protection device, the power plug contains earth line, and make sure it is reliable earth line. Check the protect system of leakage protection each time before use. 2.Do not turn on water pump, heat pump or air bubble pump without water. 3.Before turn on water pump, check if the water level over jets 10 to 20 mm or not, make sure regular usage of water pump otherwise it will be destroy because of water leakage. 4.
PAGE 3
Chain wheel of glass door (A)firstly,fix the wheel on the sliding glass door. (B)Put the movable glass door balance STEP 3 into up and down aluminum. Plastic pad STEP 4 (A)Hold down plastic pad under aluminum post of glass door (if length of plastic pad is not suitable then can be cut to be the best one)then put it on the bathtub focus on the screw hold of room body lock on the screw. (B)assembly the sliding glass door on the bottom tray. fix the door with screw.(as the picture 3) 1.bottom 2.
PAGE 4
STEP 1 To adjust screws of bathtub in order to make it balance with the ground if it is not smooth of the ground. Specification 15 .9 0(5 ) SP4x15 SP4x25 The socket of power and the socket of telephone Cold water pipe Hot water pipe Specification (refer 1800 1250 (49.2 ) Chain wheel of glass door STEP 2 to Picture 1) Put the body room upon the bathtub, focus on screw's hold then use M6x25 screws to well locked.
PAGE 5
Time/temperature down Time/temperature up Lamp Fan CD Warning bell VoLume down VoLume up Temperature Steam Time Ozone FM Radio Telephone Frequency up Frequency down ON/OFF Flash Power Warning bell Fan Lamp Telephone Steam Volume down Sterilization CD and radio Volume up Z Time and temperature Frequency 1.control remote with functions of waterproof and damp-proof. 2.usage of control remote are similarity with computer panel's function 1 to 12. 3.the effect of usage distance will be 5 meter. 4.
PAGE 6
As the from the picture,please make the connection according to the serial number v1,v2,etc. Get through power turn on on the screen of control panel.Top light be on,screen lighting, showing temperature and logo of lighting after within 3-6 seconds being data of self-checking,meanwhile power on other functions,press this button again to power off all functions but that is not cut the power.
PAGE 7
Press into temperature setting,there showing the logo of steam and the temperature will be set for 45 minutes by system, press into up and down the temperature adjustment, the range is 30 to 60 degree. The steam will be stop automatically when the inside temperature will reach to the setting temperature. Press into FM Radio function, sounds come from speaker.Press to search channel by manual acting, press half second then that is channel searching automatically. Press again to turn off FM.