Whirlpool Installation & User Manual ARL - 084P Serial Number:
No. 1 2 3 4 5 6 1 English Pneumatic on/off switch Waterfall Shower Wand Function Selector Hot/Cold Water Mixer & On/Off Headrest No.
All measurements are given in Inches Designs and sizes can vary. We accept no liability for errors, manufacturing tolerance and product changes.
Thank you for purchasing this product. This manual is for use with ARL-084P Whirlpool Bathtub. This manual describes the general installation process, safety procedures, operating instructions, and basic maintenance. Please take your time to read this manual in its entirety before installation and before using this product. Please save this manual for future reference. Important Precautions: 1. Please check the labeling on each package to ensure it matches the item description you have ordered.
9. Persons with a medical history of heart problems, blood circulation, high or low blood pressure, obesity, diabetes or similar health concerns should consult your doctor before using this product. 10. Excessive use of this product can lead to heatstroke. Heatstroke occurs when the body loses its ability to regulate a normal temperature range. 11. Elevated body temperatures can cause such symptoms as dizziness, drowsiness, unconsciousness and heatstroke.
Technical Parameters 22. Ensure the water supply lines for this product has its own dedicated water shutoff valves installed in an accessible location. 23. Ensure there is enough space and access to connect, adjust or fasten the various supply lines, waste line and other components. 24. Be sure to check each installation step with this manual to ensure the product is installed correctly. The product must be installed with all the feet or supportive legs touching the floor before any use.
Maintenance: Recommended cleaning the whirlpool features monthly with a whirlpool cleaning solution from your local hardware store. Follow the instructions of the whirlpool cleaning solution. If not cleaned regularly you may notice black flakes in the bath – if this happens you should clean the whirlpool system. Consider cleaning the whirlpool system with whirlpool cleaning solution repeatedly until the black flakes disappear.
F lowchart 2 1 Air Bubble Regulator Valve: This valve is used to control the amount of air bubbles in the Water Jet Feature . 23. 5 " 3 1 4 2 6 5 H C 7 3 4 10 9 No. 1 2 3 4 5 7 ENGLISH Air Regulator Pneumatic switch Handshower Fancet:Hot Switch Faucet:Selector Switch 8 No.
F lowchart 5 Faucet Operation: C H ON Shower OFF OFF Waterfall ON OFF 1. The middle faucet is functional faucet. The faucet is closed when it keeps in the middle position. When you rotate the faucet 90 to the left, the water will come out from the hand shower; and when you rotate the faucet 90 to the right, the water will come out from the waterfall. 2. The water temperature is controlled by the hot water faucet H and cold water faucet C.
8 7 8 9 Test functions, Check for leaks. Ensure all connections are tight. Install access panel.
6 7 Connect any ground connections to your household ground. 9 Connect water connections and electrical supply.
F lowchart 3 Faucet Operation: Review connections. C Install handshower. H C H ON Shower OFF 4 OFF Waterfall ON OFF 1. The middle faucet is functional faucet. The faucet is closed when it keeps in the middle position. When you rotate the faucet 90 to the left, the water will come out from the hand shower; and when you rotate the faucet 90 to the right, the water will come out from the waterfall. 2. The water temperature is controlled by the hot water faucet H and cold water faucet C.
1 Adjust leveling legs. F lowchart Air Bubble Regulator Valve: This valve is used to control the amount of air bubbles in the Water Jet Feature . 2 Remove access panel. No. 1 2/3 4 5 6 7 English Air Regulator Hot/Cold Water Mixer & On/Off Selector Function Selector Shower Wand Cold Water Supply Inlet No.
Maintenance: Recommended cleaning the whirlpool features monthly with a whirlpool cleaning solution from your local hardware store. Follow the instructions of the whirlpool cleaning solution. If not cleaned regularly you may notice black flakes in the bath – if this happens you should clean the whirlpool system. Consider cleaning the whirlpool system with whirlpool cleaning solution repeatedly until the black flakes disappear.
Technical Parameters 22. Ensure the water supply lines for this product has its own dedicated water shutoff valves installed in an accessible location. 23. Ensure there is enough space and access to connect, adjust or fasten the various supply lines, waste line and other components. 24. Be sure to check each installation step with this manual to ensure the product is installed correctly. The product must be installed with all the feet or supportive legs touching the floor before any use.
9. Persons with a medical history of heart problems, blood circulation, high or low blood pressure, obesity, diabetes or similar health concerns should consult your doctor before using this product. 10. Excessive use of this product can lead to heatstroke. Heatstroke occurs when the body loses its ability to regulate a normal temperature range. 11. Elevated body temperatures can cause such symptoms as dizziness, drowsiness, unconsciousness and heatstroke.
