Installation Guide

Sink to Countertop Installation Guide
www.arielbath.com Atlas, Inc. All Rights Reserved.
LUXURY REDEFINED
Required For Installation
Sink basin
Countertop
Backsplash
Permanent marker
Caulking gun
Wing bolts
Undermount clips
01. Place & Trace
MARKER
Place the sink basin on the bottomside of the countertop and
create mark guides onto the countertop and sink basin.
02. Prepare Sink Basin
SEALANT
Apply a heavy amount of sealant around
the topside of the sink basin’s edge using a caulking gun.
03. Flip Over & Place
Flip the sink basin over and carefully place it within the
guidemarks on the bottomside of the countertop.
04. Dry in Place
Once the sink basin is placed in the desired position, press down and
smooth out any excessive caulk with your finger.
Model Series Compatibility
Cambridge
Americano
Westwood
Kensington
Hollandale
Hamlet
Shakespeare
Adams
Epoxy: Loctite-#1365868, Gorilla Glue-#4200101
Sealant: Liquid Nails - LN-933, Loctite - PL530, GE Silicone II-#M90010
A
B
C
D
E
F
G
L
M
05. Preparing Stud Bolts
Fill small divots in countertop with epoxy.
Insert stud bolt with male end facing upwards.
Allow 12 - 24 hours to dry along with the sink basin.
1
EPOXY
1 2