Installation Guide

PAGE 1
INSTALLATION GUIDE STOP, please make sure the cabinet is level before installing the counter top + Base cabinet + Permanent marker « Counter toy Silicone (Recommend Liquid overtone Nas #LN-933 or Locate #PL530 # ¥ + Sink basin or GE Slickness || #M90010) ‘Wing nuts (4) + Backslash + Epoxy (Recommend Locate Bolts (4) « Hardware #1365868 or Gorilla Glue #4206101) «Caulking gun Power SINDHI «Drywall Screws ‘Washers (4) Under mount clips (4) STEP PLACE & TRACE STEP 2 PREPARE SINK BASIN Place the sink basin on t
PAGE 2
INSTALLATION GUIDE STEP § ATTACH UNDER MOUNT CLIPS STEP 6 ATTACH BASE CABINET TO WALL Please tighten Bolt (A) into wing nut (B) slide on washer Place cabinet In desired location and determine where and guide through Under-mart clip {D) opening the wall studs are. into threaded bolt hole in the counter top. ONLY-Hand Tighten Bolt {A) to a depth of about /4" below counter top surface.