Instructions / Assembly

ManualsBrandsAriens ManualsKitchenZoom XL Trailer Hitch

Instruction Sheet

Kit Number: 71509300

ZT XL/ZOOM XL HITCH KIT

Package Contents

Check contents of your kit for the parts listed (Figure 1):

INSTALLATION

WARNING: FAILURE TO FOLLOW

INSTRUCTIONS could result in personal

injury and/or damage to unit.

Read, understand, and follow all safety

practices in Owner/Operator Manual before

beginning.

Item Qty Description Ariens P/N

1 ZTXL/XL Hitch Plate 03267251

2 .38-16 Nut, Locking Top

Flange

06542000

2 .50-13 Nut, Locking Top

Flange

06543600

2 Flat Washer 06441900

2 Flat Washer 06436200

1 Trailer Hitch Decal 05305000

2 .50-13 x 1.00" Hex Head

Bolt

05947100

2 .38-16 x 1.00" Hex Head

Bolt

05948700

WARNING: AVOID INJURY! NEVER attempt

to make any adjustments to unit while engine

is running. STOP engine, remove ignition key,

and wait for all moving parts to stop and hot

parts to cool before servicing.

WARNING: AVOID INJURY! Towing

equipment changes steering characteristics

and maneuverability, increases braking

distances, and alters the unit’s center of

gravity.

Consult the original equipment

manufacturer’s owner’s manual to determine

if your unit can support this kit. Always follow

all OEM installation, operation and safety

requirements before using this kit.

Figure 1

ID001

Summary of content (3 pages)

PAGE 1
Instruction Sheet Kit Number: 71509300 ZT XL/ZOOM XL HITCH KIT 3 WARNING: FAILURE TO FOLLOW INSTRUCTIONS could result in personal injury and/or damage to unit. Read, understand, and follow all safety practices in Owner/Operator Manual before beginning. 4 2 7 1 5 Package Contents 8 Check contents of your kit for the parts listed (Figure 1): Item Qty Description Ariens P/N 1 1 ZTXL/XL Hitch Plate 03267251 2 2 .38-16 Nut, Locking Top Flange 06542000 3 2 .
PAGE 2
Install Safety Decal on the ZTXL/XL Hitch Plate (Figure 3) CAUTION: This kit was designed to be installed by a manufacturer’s authorized service technician, not by an end user. Make sure this kit is installed by an authorized servicing dealer who has been trained in the installation and service of trailer hitch kits. Installation 1. Line up the ZTXL/XL Hitch Plate (item 1) with holes on back of frame. (Figure 2) 2. Install the ZTXL/XL Hitch Plate (item 1) with two .38-16 x 1.
PAGE 3
SAFETY Read and understand safety decal warnings prior to using the hitch. Always replace safety decal if missing or damaged (figure 4). IMPORTANT: This hitch was developed for equipment rated to support a 30-pound tongue weight and a 300-pound towing capacity. Consult the original equipment manufacturer’s owner’s manual to determine if your unit can support this kit. Always follow all OEM installation, operation and safety requirements before using this kit.