Replacement Part List

© Copyright 2009 • Ariens Company • 655 W. Ryan St. • Brillion, WI 54110-1072 03887600 03/09 Page 1 of 2
Instruction Sheet
Kit Number: 71701400
LOG SPLITTER LICENSE PLATE KIT
NOTE: In order for the license plate kit to fully function
the trailer light kit (p/n 71701300) must also be installed.
Package Contents
Check the contents of your kit for the parts listed below
(Figure 1):
INSTALLATION
1. Locate the predrilled mounting holes beneath the
rear of the splitter beam. See Figure 2.
2. Install license plate bracket (item 1) using two
1/4-20 x 3/4 hex bolts (item 3) and two 1/4-20 nyloc
flange nuts (item 4). See Figure 3.
WARNING: FAILURE TO FOLLOW
INSTRUCTIONS could result in personal injury
and/or damage to unit.
Read, understand, and follow all safety
practices in Owner/Operator Manual before
beginning.
ACCIDENTAL ENGINE START UP can cause
death or serious injury. ALWAYS stop engine,
wait for moving parts to stop, wait for hot parts to
cool and remove wire from spark plug before
adjusting or servicing.
UNIT CAN CAUSE SERIOUS INJURY if it rolls
out of control or tips over. Chock wheels when
unit is not attached to a tow vehicle.
Item Description Qty Part Number
1 License Plate Bracket
1 03910251*
2Light
1 03888600*
3 1/4-20 x 3/4 Hex Bolt
Grade 5
2 05946800
4 1/4-20 Nyloc Flange Nut
2 06500012
* Items come preassembled.
Figure 1
1
IC0005
3
2
4
Figure 2
IC0010
1
3
4