Instructions / Assembly

07900223 • 1/17 • Page 9 of 9
Lower Center Hoop
See Figure 29.
1. Remove hairpins from lock pins and remove lock pins
from hinge plate.
2. Lower hoop and secure with lock pins and hairpins.
IMPORTANT: Return center hoop to the raised position
when clear of obstacles.
Models That Require New Seat Plate
The following models require a new seat plate (part
number 04995651) to install this ROPS Kit:
IMPORTANT: Register Your ROPS Kit
You or the dealer you purchased this kit from must
register your kit at the time of purchase. Know the model
and serial number of your ROPS Kit and register online
at www.ariens.com or www.gravely.com. See Figure 30
for label location.
Model Number
Serial Number
Record your serial number here.
WARNING:
AVOID INJURY. Lower the
center bar only when needed to drive
under an object. There is no rollover
protection with the center bar in the
lowered position. DO NOT wear seatbelt
when ROPS hoop is in lowered position.
Lowered
Position With
Bagger Installed
Lowered
Position
With No
Bagger
Installed
Figure 29
Model Serial Number
991150 000101 – 102
991152 000101 – 103
991154 000101 – 103
991156 000101 – 102
991160 000101 – 103
991162 000101 – 166
991164 000101 – 359
991166 000101
89100900
Figure 30
Model / Serial
Number Label
(Either Side)