Operating Guide

EN - 19
CHECK TIRE PRESSURE
See Specifications on page 37 for
recommended tire pressure.
CHECK CARBON CANISTER
FILTER
Models 915224, 915225, 915237, 915239,
915241
See Figure 12.
Clean or replace filter whenever engine air
filter is cleaned or replaced.
CHECK FASTENERS
Check for loose or missing hardware.
LUBRICATE UNIT
Models 915226, 915227, 915228, 915229,
915237, 915239, 915241
See Figure 13.
1. Place unit in service position. See
Service Position on page 18.
2. Apply grease to seat tracks through slots
under seat plate.
3. Return seat to operating position and
slide seat back and forth to spread
grease along tracks.
WARNING: AVOID INJURY.
Explosive separation of tire
and rim parts is possible.
• DO NOT inflate tires above
the recommended pressure.
• DO NOT inflate tires with a
compressor; use a hand
pump.
• DO NOT stand in front of
tire assembly when
inflating. Use a clip-on
chuck and extension hose
long enough to allow you to
stand to one side.
• DO NOT mount a tire
without proper equipment
and experience.
Figure 12
1. Carbon Canister Filter
1
Figure 13