Use and Care Manual

EN - 10
Check Tire Pressure
See Specifications on page 22 for tire
pressure.
Fill Engine Fuel Tank
Fill fuel tank. DO NOT OVERFILL! See
Specifications on page 22.
Purge Hydraulic System
IMPORTANT: CHECK HYDRAULIC OIL
BEFORE OPERATING! Add hydraulic oil to
operating level before first use if necessary.
The system may take up to two gallons. See
Hydraulic Oil System on page 19.
Before first use or after hydraulic system
maintenance:
1. Purge any air in the system by cycling
the hydraulic cylinder. See
Purge
Hydraulic System on page 20.
2. Add hydraulic oil as necessary to bring
system to operating level.
NOTICE: Some hydraulic fluid may overflow
from the cap/breather as the system warms
up and the fluid expands. Do not operate the
unit without the proper amount of oil in the
reservoir.
Check Function of All Controls
See Operation on page 15.
WARNING: AVOID INJURY.
Explosive separation of tire and rim
parts is possible when they are
serviced incorrectly:
• Do not attempt to mount a tire
without the proper equipment
and experience to perform the
job.
• Do not inflate the tires above
the recommended pressure.
• Do not stand in front or over
the tire assembly when
inflating. Use a clip-on chuck
and extension hose long
enough to allow you to stand
to one side.