Use and Care Manual

EN – 40
See Figure 93.
IMPORTANT: Two flat steel washers will fall when short
axle is removed.
7. Hold differential gear in place and remove short axle.
8. Remove differential.
Install Differential Gear
See Figure 94.
1. Reinstall short axle until a small portion of axle is
through frame.
2. Reinstall two flat steel washers onto axle.
3. Align differential gear with pinion gear and short axle.
Reinstall short axle into differential. See Figure 95.
See Figure 96.
4. Reinstall long axle into differential gear.
5. Reinstall E-ring onto axle end.
6. Reinstall bottom cover and secure with two tapping
screws and four hex bolts.
7. Reinstall wheels onto axle and secure with snap clips.
8. Return unit to operating position.
9. Reconnect spark plug wire and fill fuel tank.
Figure 93
Figure 94
Figure 95
Figure 96