Use and Care Guide
EN - 15
IMPORTANT: Support tractor / frame so it will
not tip when disconnected from brush
attachment in next step.
See Figure 20.
8. Remove hardware securing brush
attachment to tractor / frame.
9. Rotate brush attachment apart from
tractor / frame on mount rod and remove
from frame.
See Figure 21.
10. Slowly rotate tractor / frame forward so it
rests on attachment sheave. Protect
attachment sheave so it does not incur
damage.
11. Remove hardware securing bottom cover
and remove bottom cover.
WARNING: ALWAYS support
unit frame and brush attachment
when loosening hardware
holding them together.
Figure 19
1
1. Machine Screw
2. Lock Washer
3. Brush Lock Trigger
2
3
CAUTION: AVOID ENGINE
DAMAGE. Do not leave unit in
service position for longer than
30 minutes. Allow 30 minutes for
oil to return to crankcase before
starting engine.
Figure 20
1. Tapping Screw
2. Mount Rod
3. Mount Bracket
1
2
3